Antennacraft HDMS9100 12V Hi-Def Digital Amplified Antenna Installation
Connecting Cable to The Antenna
- Loosen the two screws on the terminal board cover on the bottom of the antenna. This will expose a threaded coaxial receptacle and three special screw-type terminals.
- Screw the supplied coaxial cable’s lead-in connector onto the threaded terminal. Caution: Be sure the center conductor of the cable is in the hole of the F-connector before tightening.
- Your cable may have either Yellow/Black/White wires or Red/Black/Blue rotator wires.
Note: Only loosen clamping terminals up to (more…)
