The Backstopper CA-5010.II is a rear impact warning sensor system designed to aid the driver when backing up their vehicle. The system includes a color LED digital display with a four-sensor direction indicator mode and (4) ultra-sonic sensors with "quick disconnect" waterproof connectors.
The colorful LED digital display has a built-in buzzer for visual and audible warning. The display also has a four-sensor direction indicator which allows the driver to see which sensor is being set of the most. This is useful to allow you do know exactly where the obstruction is behind the vehicle. The design is a top-dash mount design which makes the display easy to mount in several locations such as the top of the dash board, inside a pocket or on top of the rear view mirror.
The CA-5010.II can be retrofited with optional metal bumper sensors for any trucks that have metal or chrome plated bumpers. The optional sensors can help the unit to avoid false-alerting the driver on vehicle with metal bumpers.
The CA-5010.II also has built-in intelligent warning Intelligent Detection to allow to system to be compatible with vehicles that are equipped with tow-hitches and spare tire racks or other protursions on the rear of the vehilce. The intellignet detection can be calibrated to learn where these protrusions are on the bumper and will not send false-alerts to the driver when the vehicle is in reverse.
The sensors wide detection angle will alert the driver of any small children, pedestrians, animals or small unseen objects such as bicycles or parking poles. This makes it very convenient for parking in a parking garage, a crowded lot or even in your own driveway.
The CA-5011 system has a top-dash mounted LED display with a 4-direction sensor indicator to give the driver separate distance readings on every sensor. It can be mounted on top of the dash board, the steering column or even on top of the rear-view mirror like in the installation above.
The sensors can be painted to match the color of the vehicle. This way the vehicle can still look clean and not appear as though any aftermarket equipment has been installed. A hole saw bit comes included with the system to help drill the exact size hole needed to fit the sensors into place.
- Color LED digital display (16ft. cable length)
- Four-sensor direction indicator mode on display
- Display can be mounted on the dash board or on top of the rear view mirror
- Latest display design matches most dash board curvatures
- Built-in buzzer for audible warning
- Dual intelligent functions for cars with tow-bar, spare tire and other protrusions on the rear bumper of the vehicle
- Four-stage audible obstruction warning signaling
- (4) ultra-sonic sensors with "quick disconnect" waterproof connectors (25ft. length)
- Sensors can be painted to match the color of the vehicle
- Hole saw bit included for sensor installation
|Display Type:||Top Dash Mount|
|Number of Sensors:||4|
|Sensor Cable Length:||17 Ft.|
|Display Cable Length:||16 Ft.|
|Hole Saw Diameter:||21 mm|
|Power Source:||12 Volt|
One of my solar panels didn't work when they arrived, it was dead. Still not sure what the problem was, it looked fine to me. You guys were great at getting it replaced and I'm now enjoying the 12 volt lifestyle. Great service, Great products & Great people, tough to find these days when everything seems to be going down hill.
Have a nice day, Randy Parker Randy Parker — , Texas —