The SecurView SV6703 is an ultra-small mini bumper-fit flush mounted backup camera that can be installed almost anywhere on the vehicle as long as there is a flat surface. The flush mount design is perfect for user's who want the car looking completely factory with no aftermarket equipment sticking out.
This backup camera is unique in the way that it is smaller than most flush mount cameras and does not require a lot of space behind the mounting surface to be installed. Since it is a flush mount camera, a hole will be required for installation, however a hole saw bit is included with the camera to help drill the correct size hole. Once the hole is drilled the camera will snap into place leaving you a nice flush look on the vehicle surface.
- Ultra-small design with super wide viewing angle
- Flush mount design makes the camera barely noticeable and keeps the vehicle looking clean
- Can be mounted in the front or the rear of the vehicle
- Built-in distance meter to help the driver accurately judge distance behind the vehicle when reversing
- Waterproof design (IP68)
|Horizontal Viewing Angle:||170°|
|Vertical Viewing Angle:||120°|
|TV System:||NTSC / PAL|
|Normal / Reverse Image:||Reverse Image Only|
|Resolution:||420 TV Lines|
|Illumination:||0.5 Lux / F 1.2|
|Dimensions (MM):||20(L) x 20(W) x 27(D)|
|Power Source:||12 Volt|
spoke with John today - he was very helpful and suggested how i could hook up the power system that i need for portable power - the parts i would need and how I would do it, saves me a LOT of money and (hopefully) will do what i want it to do. He spent lot of time and was very patient - Give this man a raise! S. Hammond